6 Series EEx de Wellglass Luminaire 620 Range
610 Wellglass	630 Wellglass	Petrel Lighting Index
	Contacts

Features
¥	Some versions available in stainless steel or gun metal in addition to standard aluminium alloy body
¥	Optional external reflector or wire guard
¥	Optional pivot bracket for directional control
¥	Simple re-lamping with standard lamps
¥	High ambient temperature versions

Certification & Approval
Certification Code:	EEx de IIB or IIC T2 to T6 (Dependent on lamp source - see data)
Certification Standard:	BS5501 Parts 1, 5 and 6 (EN50014-018-019) IIB and IIC options @ standard ambients all Atex approved.
Certificate Number:	SIRA Ex 94C 1043
Degree of Protection:	IP 66 to IEC 529

Technical Data

Supply voltage		Standard product 240v, 50 Hz. Other voltages and frequencies on request.
Control gear		Integral within the luminaire. (250w SON uses lamp with internal ignitor) Operating power factor typically 0.9.
Lamp source options		Certified with elliptical lamps. Max. 200w GLS T3 @ Ta = 550C 125w HPMV/MBF T4 @ Ta = 400C or T3 @ Ta 600C Maximum 25w SL or 20w PLCE T6 @ Ta = 400C or T5 @ Ta = 600C Both with ES (E27) lampholder. 300w GLS T3 @ Ta = 550C 150w SON T4 @ Ta = 400C or T3 @ Ta =600C 250w SON-I T3 @ Ta = 400C 250w MBI T3 @ Ta = 400C 125w HPMV/MBF T4 @ Ta = 400C or T3 @ Ta =600C 250w HPMV/MBF T3 @ Ta = 390C All with GES (E40) lampholder. Standard temperature classification applies to all methods of mounting Up to 200W GLS BC also available. Lamps are not included. High Temperature version (at extra cost). Atex approval pending. 300w GLS T3 @ Ta = 850C 150w SON T3 @ Ta = 900C 250w SON- I T3 @ Ta = 700C 250w MBI T3 @ Ta = 700C 125w HPMV T3 @ Ta = 900C 250w HPMV T2 @ Ta = 650C or T3 @ Ta = 500C   N.B.For Ta up to 600C, cable must be suitable for 1160C operation. Above Ta 600C cable must be suitable for 1460C operation.
Mounting facilities		Fixed strap as standard. Pendant or pivot bracket available.
Cable entries		2 x M 20 - ISO (1 plugged) as standard. Other thread forms available.
Terminals		4 wire and Earth with looping facility. Cable size 4 mm2 max.
Operating temperature		-20°C to +40°C as standard. Atex approved. Options available, at extra cost, for operation down to -45°C ambient but this must be specified at order stage. Atex approval pending. See above for versions available for operation at up to 90°C. Atex approval pending.
Reflector		Internal polished aluminium. External reflector available at extra cost.
Access for lamp change		Removable wellglass with tapered spigot flamepath for easy access. Internal flamepath construction with full gasket protection.
Access for connections		Removable EEx e terminal cover with 4 stainless steel screws.
Finish		2 pack aqua epoxy paint on pre-treated & primed surface. Alternative finishes available.
Material		Corrosion resistant light alloy to BS1490.
Protective guard		Wire guard available at extra cost.
Weight		Standard
		SON & MBI	15.5 kg
		HPMV/MBF	13.5 kg
		GLS	11.5 kg

How To Order

Product codes are formed as follows:

Series Ref.	Lamp Size & Type	Voltage	Frequency
620	e.g. 250w SON-I	e.g. 240	e.g. 50

and written: 620 / 250w SON-I / 240 / 50

Special features are specified using the following codes:

/Pg13.5	Pg 13.5 cable entries
/Pg16	Pg 16 cable entries
/WG	Wire Guard
/R	External Reflector
/PB	Pivot Bracket
/P	Pendant mounting
/HT	High ambient temperature

These are added to the product codes as required:

e.g. 620 / 250w SON-I / 240 / 50 / Pg16 / WG / HT

Please contact PFP for any technical advice you may require including photometric details.

A technical design service is available for all our customers.

Tel: +44 (0) 121 783 7161 Fax: + (0) 121 783 5717 Email: sales@pfp-elec.co.uk www.pfp-elec.co.uk

Send mail to rob@robbardo.com with questions or comments about this web site.
Copyright © 2001 Electroworld Agencies
Last modified: July 22, 2001